The M110(G) (and it's main components) is not RoHS complient and because of this End-Of-Life.
The M110 has been replaced by the AM120 (May 2006)
The M110 is a Tri Band GSM GPRS modem, build for stand-alone GPRS - TCP/IP connections and datatransfert. Typical applications include Telemetry, Security Systems, Data Loggers, or any remote equipment with serial data port. The M110 has his own TCP/IP stack and can be used as a stand-alone, to control your applications and / or equipment, over the internet
Key Features 
- Tri Band – 900, 1800 and 1900 MHz GSM Solution
- RS232 serial interface
- Six indication LED's
- Various configurations to provide flexibility
- Motorola DSC Bus interface
- GSM Phase2+ features
- Supports GPRS data
- Supports GSM voice, data, fax and SMS
- Internal SIM to suit all applications
- 2 W 900MHz, 1 W 1800 and 1900 MHz
- 5 to 24 Volt Operation
- -30 to +60 Deg C operating temp range
- Embedded ultra low-power MC, MSP430F149 (60 Kb Flash, 2 kB Ram)
- Processor evalutated and controlled LED’s (GPRS, Network, 1PPS)
- Developed for stand-alone GPRS connectivity
- Improved custom-utilized bootloader via GPS Port (on-board switch)
- Protection includes:
- All I/O are fully ESD protected
- User Selectable ultra low-Power operation. (MSP monitors the sensor inputs and modem is only active when needed). Estimated Average Power Consumption (4xD-cells): 1.4 Ah / Year.
- Configurable Communication Ports:
- GSM Port: Direct DTE Communication with MSP, G18 or M12
- I/O Port: Direct Communication with MSP, M12, Bootloader, and used for Sensors/Controls
- 2 digitally controlled outputs (+/- 5.5V (range of 11V))
- 4 digital (12V) and/or analog (0-3V, 12 bits resolution) inputs:
- 1 digital (12V) or digital counter input
- 1 power supply output (5V / 100 mA)
- 1 Grounding Pin
- GPS Prepared (M12 module)
- H/W: Antenna, 5V
- S/W: SMS or GPRS based Tracking & Tracing
- Adjustable Time-Scheduled SMS with full status report of coordinates, sensor status, and control outputs
- Adjustable Elapsed Distance SMS (example: every 10 km a full status report is send to the SMS server)
- Remote SMS or GPRS based control to adjust user settings and output controls
- GPRS S/W:
- TCP or UDP
- Ping Controls
- Adjustable Time-Scheduled report with full status, coordinates, sensor status, and control outputs
- Adjustable Elapsed Distance report (example: every 10 km a full status report is send to Remote server)
- Remote based control to adjust user settings and output controls
- Start / Stop Alarm
- Geo fencing
- Digital counter
- Battery-Pack prepared (NiCd or NiMH, 0.8Ah or 1.6 Ah @ 9.6 Volt
- Windows M110_TT User Program for configurating and re-flashing the M110
|
