|
|
The M110(G) (and it's main components) is not RoHS complient and because of this End-Of-Life.
The M110 has been replaced by the AM120
M110G for AVL, Track & Trace
The M110 is a Tri Band GSM GPRS modem, build for stand-alone GPRS -
TCP/IP connections and datatransfert. Typical applications include
Telemetry, Security Systems, Data Loggers, or any remote equipment with
serial data port. The M110 has his
own TCP/IP stack and can be used as a stand-alone, to control your
applications and / or equipment, over the internet
| 
Key Features
 |
Tri Band – 900, 1800 and 1900 MHz GSM Solution
| |
RS232 serial interface
| |
Six indication LED's
| |
Various configurations to provide flexibility |
|
Motorola DSC Bus interface
| |
GSM Phase2+ features
| |
Supports GPRS data
| |
Supports GSM voice, data, fax and SMS
| |
Internal SIM to suit all applications
| |
2 W 900MHz, 1 W 1800 and 1900 MHz |
|
5 to 24 Volt Operation |
|
-30 to +60 Deg C operating temp range
|
|
Embedded ultra low-power MC, MSP430F149 (60 Kb Flash, 2 kB Ram) |
|
Processor evalutated and controlled LED’s (GPRS, Network, 1PPS) |
|
Developed for stand-alone GPRS connectivity |
|
Improved custom-utilized bootloader via GPS Port (on-board switch) |
|
Protection includes:
 |
All I/O are fully ESD protected |
| |
User Selectable ultra low-Power operation. (MSP monitors the
sensor inputs and modem is only active when needed). Estimated Average
Power Consumption (4xD-cells): 1.4 Ah / Year.
|
|
Configurable Communication Ports:
|
GSM Port: Direct DTE Communication with MSP, G18 or M12 |
|
I/O Port: Direct Communication with MSP, M12, Bootloader, and used for Sensors/Controls
|
|
|
2 digitally controlled outputs (+/- 5.5V (range of 11V))
|
|
4 digital (12V) and/or analog (0-3V, 12 bits resolution) inputs:
|
1 digital (12V) or digital counter input |
1 power supply output (5V / 100 mA) |
1 Grounding Pin |
|
|
GPS Prepared (M12 module)
|
H/W: Antenna, 5V |
|
S/W: SMS or GPRS based Tracking & Tracing
 |
Adjustable Time-Scheduled SMS with full status report of
coordinates, sensor status, and control outputs |
|
Adjustable Elapsed Distance SMS (example: every 10 km a full status report is send to the SMS server) |
|
Remote SMS or GPRS based control to adjust user settings and output controls |
|
|
GPRS S/W;
|
TCP or UDP |
|
Ping Controls |
|
Adjustable Time-Scheduled report with full status, coordinates, sensor status, and control outputs |
|
Adjustable Elapsed Distance report (example: every 10 km a full status report is send to Remote server) |
|
Remote based control to adjust user settings and output controls |
|
Start / Stop Alarm |
|
Geo fencing |
|
Digital counter |
|
|
|
Battery-Pack prepared (NiCd or NiMH, 0.8Ah or 1.6 Ah @ 9.6 Volt |
|
Windows M110_TT User Program for configurating and re-flashing the M110 |
|
Customized & Tailored Program Development |
|
|
|
|
M110 Explained
Technical Specs
Screen Shots - M110 Configuration / Set-Up Programma
|
|
For additional info see also the FAQ database
|
|
|
|
