De LM130 is in de basis een light versie van de AM120, met dezelfde afmetingen, met beperktere mogelijkheden als AM120, maar met dezelfde functies. Zie tabel voor vergelijking.
Feature |
AM120 |
LM130 |
Hardware Boot Loader implemented as a separate circuit using an on-board switch |
Yes |
No |
Hardware Boot Loader implemented by using the external DTR signal as its primary control (no switch) |
No |
Yes |
Number of External Ports with flow control (RTS/CTS) |
2 |
1 |
Number of External Ports without flow control |
1 |
0 |
Number of Internal Ports |
2 |
1 |
Ignition Dedicated Input |
Yes |
Yes |
Counter Dedicated Input |
Yes |
No |
Number of universal Inputs (Digital/Analog) |
4 |
0 |
Number of universal Inputs (Digital/Analog) including counter functionally (Revolution/Tachometer) |
0 |
2 |
Dallas 1-Wire® functionality |
Yes |
Yes |
Number of outputs fully separated with common contact |
2 |
0 |
Number of outputs providing the protected power supply |
0 |
1 |
Accelerometer – dual axis |
Yes |
Yes |
1 MB Flash Memory |
Yes |
Yes |
GPS Module (Oudere AM120 = Navman) |
Fastrax |
Fastrax |
GMS/GPRS module – Motorola |
G24 |
G24 |
Internal Charger + Backup Battery Li-Ion 3.6V |
1800mAh |
3600mAh |
Number of indication Leds |
8 |
5 |
Electrical Specifications |
|
|
Power Supply Range |
12-42V |
6-42V |
Average Power consumption - Steady State operation @ 13.4V |
69mA |
38mA |
Average Power consumption – Sleep Mode operation @ 13.4V |
<1mA |
<1mA |
De AM120 en de LM130 gebruiken dezelfde Control Console, Remote Programmer and Remote commando's.
Ook kan dezelfde settings file gebruikt worden voor de AM120 en de LM130
Settings welke niet van toepassing zijn worden in beide units genegeerd.
